Waterproofing the basement can be done inside or outside the basement with large differences in the work and costs involved. The outer seal on the surface is much cheaper and can be done to prevent water from reaching the walls, but will not face the hydrostatic pressure of a high-water table if present. If the problem is the hydrostatic pressure (high water table) or walk drains of external or internal page will be needed to relieve pressure. If you are looking for the service for water proofing then you can visit at https://www.waterproofingbathroom.com.au/.
Image Source: Google
Outer seal at the bottom of page requires installation footer drain tiles that are usually connected through the wall of the pump inside the house. This, however, requires digging a trench about 4 feet wide and 8 feet deep around the house. This is often complicated by plants, patios, sidewalks, etc., must be removed first. This requires a lot of work and is very expensive and is usually done as a last resort.
Interior waterproofing covers a multiple of solutions from the excavation of the perimeter of the inside of the basement and install footer drainage pipes which channel water into a casing pot where it is collected and then pumped by a pump sump for the descent outer hose or another line discharge.