If this is the first time you are looking to rent a trailer or caravan this summer, it may not be immediately obvious how to connect the braking system to your car.
Even if you've completed the previous task, it's worth refreshing your memory because as long as the principles are the same, the steps may vary depending on the model. This is basic security and needs to be approached with care and thoroughness. You can also check for the best electronic trailer brakes via the web.
Image Source: Google
While small trailers do not require an independent braking system, brakes are essential for larger loads. Due to higher speeds and sudden stops or when trying to control the speed of the towing vehicle on a steep incline, the trailer may hit the rear of the vehicle, which may result in loss of control or loss of control of the trailer itself that is impacted. it, causing it to sway back and forth and sway.
Things to remember
1. As a general rule, the weight of a fully-loaded trailer should not exceed 85% of the vehicle used for towing. So make sure the vehicle you are driving is heavy enough to transport the trailer.
2. Locate the towing vehicle's electrical system at bumper height and connect the trailer brake harness cables. Trailer brakes do not use hydraulic fluid.
3. For added safety, most braking systems for larger trailers are equipped with a control panel that the driver can activate by hand at a location within easy reach of its control station.